#material_info
Polyether ether ketone (PEEK) is a highly robust engineering material that has long been employed in the production of implants, establishing a track record spanning several decades. Its utilization in the 3D printing of medical devices and implants has experienced a notable surge in popularity in recent times.
#the_sciences
• Made from medical grade PEEK resin with engineered process for absolute quality
• Biocompatible
• Tough and strong 3D printed objects comparable to moulding
#material_highlights
• Outstanding strength and impact resistance
• Resistant to most chemicals especially acids
• USP Class VI and ISO 10993 certified
• Gamma or EtO sterilizable
#ideal_for
Implants, surgical instrument and devices (such as body fluid container, microfluidic device, pump impeller, stirrer, etc.)
#Cranioplasty_
Implant_
Printed_
by_
NOVUS_
Medical_
PEEK
#material_properties
Flexural strength (ASTM D790)
95 MPa
Flexural modulus (ASTM D790)
4.00 GPa
✔ Industry standard facilities
✔ Produced in ISO 7 cleanroom facilities
✔ ISO 9001, ISO 13485 quality management system
✔ In-house ethylene oxide (EtO) sterilization
#medical_quality
#recent_articles
